SLIDE HI-TEMP 1800
Slide's Hi-Temp 1800 is a very easy to use release for stainless steel and ceramic molds. No need to heat stainless steel molds first with Slide 1800- just spray 2 thin coats and the release dries instantly. The mold should be visible through the release otherwise you've applied too much. Good for ceramic molds as well as stainless steel molds and good for multiple firings under 1350 degrees. If firing above 1350 degrees, reapply after each use. 12 oz. aerosol can. Cannot be shipped air, only UPS ground service.
- Slide Hi-Temp 1800
(4397) reg. $19.95
On Sale- $17.95
|
|
|
 |
