All in One Workshop

THE ALL-IN-ONE WORKSHOP for GLASS or LAPIDARY ARTISTS Set yourself up with the ultimate grinding workshop with Inland's top of the line SwapTop™ machines. You can grind stained glass, fused glass, gems and stones. Need to grind and polish straight edges of your fused glass projects? The Flat Lap has everything you need without the messy oils most laps use. Need to cut patten bars, trim the edges of your edge construction pieces or trim the edges of your fused bowls? The Trim Saw will do just the trick. Need to grind the edges of your fused glass jewelry pieces or gems? The Glass Grinder is the answer. All your glass and lapidary grinding needs can be accomplished with the All-in-One Workshop. The All-in-One Workshop can be set up as a Flat Lap machine (6" or 8", depending which option you choose), a Glass Trim Saw or a Glass Grinder. Each one of the 3 machines can be set up in just minutes. When you want to convert one machine into another you simply remove one SwapTop™ surface and replace it with another. The new surfaces just snap in place. The same housing and motor is used for each machine; just the surfaces are replaced and the grinding disks or blades installed. The All-in-One Workshop uses Inland's strongest motor running at 2,800 RPM with 48 oz-in. torque. The new, more powerful motor is controlled with a variable speed controller so you can run your machine at the speed you need for the work you're doing. Included in the Flat Lap configuration are 4 flat lap disks; 170, 325, 600 and 1200 grit. You'll also find included; a master lap, polishing pad, polishing powder and brush, brass arbor and nut, wrench and allen head wrenches. The Trim Saw set-up includes a SwapTop™ table saw surface and 6.5" x .020" diamond coated blade. The Glass Grinder set-up includes a SwapTop™ grinder surface, a 1" diamond grinder head, and sponges. Two year Full-Confidence warranty. Made in the USA.