Table of Contents
FLETCHER 07 STEEL WHEEL CUTTER
Large diameter, 7/32" steel wheel cutter with a sharp angle (114°). Large wheel cutters are best for straight line cutting or hard opalescent glass. Steel wheel cutters are usually good for 8 hours of cutting. Made in the U.S.A. Mixable for 12 price with cast metal handle cutters (#2420, #2422 & #2426).
Fletcher 07 Steel Wheel Cutter
(#2420)- $3.95
$3.16 each for 12 or more
FLETCHER 09 STEEL WHEEL CUTTER
Small diameter, 5/32" steel wheel cutter with a general purpose angle (122°). Small diameter wheels are better for cutting curves and following patterns since the wheel is able to turn in a tighter radius. Steel wheel cutters are usually good for 8 hours of cutting. Made in the U.S.A. Mixable for 12 price with cast metal handle cutters (#2420, #2422 & #2426).
Fletcher 09 Steel Wheel Cutter
(#2422)- $3.95
$3.16 each for 12 or more
FLETCHER CA9 CARBIDE WHEEL CUTTER
Small diameter, 5/32" carbide wheel cutter with a general purpose 124° angle. Small diameter wheels are better for cutting curves and following patterns since the wheel is able to turn in a tighter radius. The CA9 carbide wheel cutter is usually good for 80 hours of cutting. Made in the U.S.A. Mixable for 12 price with cast metal handle cutters (#2420, #2422 & #2426).
Fletcher CA9 Carbide Wheel Cutter
(#2426)- $12.95
$10.36 each for 12 or more
SCOREMASTER REPLACEMENT HEAD
We still stock Scoremaster replacement heads for Flectcher's Scoremaster cutters. We carry the heads in two different angles; 140° for general purpose cutting (green band- #03-701) and 114° for harder glass (yellow band- #03-703). Both have the smaller diameter 5/32" wheel. Made in the U.S.A.
Scoremaster 140° Head
(#2441-701)- $17.95
$14.36 each for 3 or more
Scoremaster 114° Head
(#2441-703)- $17.95
$14.36 each for 3 or more
DESIGNER II PENCIL STYLE CUTTER
The Designer II cutter is Fletcher's newest cutter featuring a new anti-leak lubricant dispensing system called Fiberlock™. Applying pressure while scoring dispenses liquid lubricant from the barrel to provide a flake free score. The Designer II Pencil-style cutter features a replaceable tungsten carbide wheel and and ergonomic handle for hours of fatigue-free cutting.
Fletcher Designer II Pencil Style Cutter
(#2434)- $31.95
$25.56 each for 3 or more
DESIGNER II PISTOL GRIP CUTTER
Fletcher's pistol grip cutter allows you to wrap your hand around the cutter maximizing pressure while minimizing fatigue. The Designer II pistol grip cutter features Fletcher's anti-leak lubricant dispensing system, a replaceable tungsten carbide head, and the ability for the head to swivel or remain in a fixed position. Made in the U.S.A.
Designer II Pistol Grip Cutter
(#2435)- $35.95
$28.76 each for 3 or more
DESIGNER II REPLACEMENT HEAD
The Designer II replacement head features a carbide cutting wheel. Simply pull the head out from either the Designer II Pencil or Pistol Grip cutter and push the new head in place. The replacement head will easily give you 80 hours of hassle free cutting. Made in the U.S.A.
Designer II Replacement Head
(#2434R)- $26.95
$21.56 each for 3 or more
INLAND PISTOL GRIP CUTTER
A favorite among glassworkers who feel they can't get enough pressure when scoring glass with a regular cutter. The hand wraps completely around the handle and ensures the correct positioning of the cutter head to the surface of the glass. Oil-fed carbide head, wheel and axle, all make for an exceptionally smooth cutter. Easy to replace carbide head available separately.
Inland Pistol Grip Cutter
(#2547)- $26.95
$21.56 each for 3 or more
INLAND BRASS BARREL CUTTER
A luxurious feeling brass barreled cutter that's comfortable enough to hold for hours of cutting. The knurled brass barrel gives this cutter heavier weight and a feeling of stability. The oil-fed carbide head is made to close tolerances to produce a cutter with a very smooth feel. A replaceable carbide head (purchased separately) just screws on with a single screw.
Inland Brass Barrel Cutter
(#2545)- $24.95
$19.95 each for 3 or more
INLAND SLIMLINE CUTTER
The slimmer body is most like holding a pen or pencil. The lightweight, slightly textured acrylic barrel makes it easy to hold and cut for extened periods of time. Oil-fed for smooth cutting, the carbide head, wheel and axle will provide at least 80 hours of cutting. A replaceable carbide head (purchased separately) just screws on with a single screw.
Inland Slimline Cutter
(#2546)- $21.95
$17.56 each for 3 or more
INLAND REPLACEMENT HEAD
Inland's replacement head is the standard replacement for all of it's hand held cutters. The head features a tungsten carbide wheel and axle manufactured to close tolerances to produce a very smooth cutting feel. At its very modest price, this is one of the best values in the glass cutter market today.
Inland Carbide Replacement Head
(#2545R)- $13.95
$11.16 each for 3 or more
MAC INNES CUTTER
Mac Innes was the first to perfect the tungsten carbide wheel for glass cutting. Combined with their precision-made handle, wheelslot and carbide axle, this cutting wheel far outlasts any other cutter available. Once the initial investment has been made, this cutter is the least expensive to own because replacement wheels are only $8.95! Replacement wheels are available in 2 sizes; 5/32" and 7/32" diameters. Made in the U.S.A.
Mac Innes 5/32" Wheel
(#2443-532)- $8.95
$7.16 each for 6 or more
Mac Innes 7/32" Wheel
(#2443-732)- $8.95
$7.16 each for 6 or more
Mac Innes Cutter
(#2442)- $39.95
$31.95 each for 3 or more
INLAND STRIP AND CIRCLEMAKER
Inland's new Strip and CircleMaker is completely re-designed. You now insert your own glass cutter rather than using a cutting wheel your're not familiar with. The Strip & CircleMaker cuts circles from 3" - 24" in diameter and can also be converted to a strip cutter for cutting strips up to 11.25". For accurate cutting there's now a viewing window so you can easily set your measurements.
Inland Strip and CircleMaker
(#2448)- $24.95
$19.96 each for 3 or more
Inland Replacement Turret
(#2449)- $7.95
$6.36 each for 6 or more
FLETCHER CIRCLEMATE II
Fletcher's CircleMate II cutter includes an aluminum bar that cuts circles from 3" - 28" in diameter. CircleMate II's best feature is its vacuum cup base. It locks firmly to glass by depressing the thumb-lever preventing "walking" while cutting your circles. A straight edge is included for cutting strips. Made in the U.S.A.
Fletcher CircleMateII
(#2430)- $54.95
$43.96 each for 3 or more
CircleMate Replacement Turret
(#2431)- $6.49
$5.19 each for 6 or more