Table of Contents
KWIK-CLEAN
No need to mix or dilute. After you have completed soldering one or both sides of your project, spray on Kwik-Clean. Typically, with a paper towel clean project thouroughly. You may use the same paper towel or a clean one to apply the patina. Mixing the Kwik-Clean with the patina gives added cleaning of the flux and a finer tone on the patina. After patina is applied, clean again with Kwik-Clean. Polish as you normally would. 16 oz. spray bottle.
Kwik-Clean
(#5401)- $12.95
$10.36 each (6 or more)
OXY-STOP
Oxidation preventative for use on soldered lines or joints. Use directly from the bottle or mixed 50/50 with water. Can be used over solder or over a wax or patina finish. An organic, non-toxic, non-corrosive and non-caustic liquid. 4 oz.
Oxy-Stop
(#2417)- $3.95
$3.16 each (12 or more)
CJ's FLUX REMOVER
Thoroughly removes residue from all types of flux. Prevents the oxidation crust from improper cleaning of lead and solder. Allows copper patina to work properly, creating a bright,
shiny finish and makes clean-up quick and easy. 8 oz.
CJ's Flux Remover
(#2413)- $5.95
$4.76 each (12 or more)
SOLDER MAGIC FLUX REMOVER
A new product from Canfield Technologies, Solder Magic Flux Remover cleans and neutralizes all commonly used fluxes. It comes in a 8 oz. plastic bottle with and handy tip applicator for easy dispensing.
Solder Magic Flux Remover
(#2418)- $6.49
$5.19 each (12 or more)
CRL GLASS CLEANER
A favorite in the glass industry, CRL Glass Cleaner is a low ammoniated glass cleaner that has powerful cleaning agents yet leaves no streaks. It has a pleasant aroma when dispensed and is packaged in a 19 fluid oz. aeorsol can. Cannot be shipped by Air.
CRL Glass Cleaner
(#2810)- $4.95
$3.96 each (12 or more)